Post by italianstallion13 on Aug 9, 2005 19:59:56 GMT -5
I saw one on eBay the other day and thought it wouldn't be too hard to make one for my Manza. I found a sheet of .40 sheet styrene and cut a pair of sides and the top.
I then filed a line on the underside where I wanted it to bend and glued the three parts together.
Then do some shaping to fit the shape of the hood your using. I put some tape on the hood to help center the part. I held it in place with some close pins and glued it in place.
After some more sanding I put a coat of primer to see how it looked. I still need to do some blending on the front but you get the picture.
I know it's a easy one but this shows how easy it is to make little goodies
I then filed a line on the underside where I wanted it to bend and glued the three parts together.
Then do some shaping to fit the shape of the hood your using. I put some tape on the hood to help center the part. I held it in place with some close pins and glued it in place.
After some more sanding I put a coat of primer to see how it looked. I still need to do some blending on the front but you get the picture.
I know it's a easy one but this shows how easy it is to make little goodies
